Standard Glass Options
Suitable for general laboratory supply when the material and intended workflow are confirmed before ordering.
Compare standard 60–200 mm glass Petri dish sets with clearly separated bottom and cover dimensions, carton quantities and order-planning information.
The range covers eight standard bottom diameters. Each option includes a separately specified cover diameter because the cover is intentionally larger than the bottom.
Standard dishes can be evaluated for research, microbiology, educational and general testing workflows. Material, sterilization suitability and exact commercial terms are confirmed against the selected configuration rather than assumed across the full range.
Use this table to define the complete set. Select a size to request its material, MOQ, sample availability and lead time.
| Bottom Diameter | Height of Bottom | Cover Diameter | Height of Cover | Quantity per Carton |
|---|---|---|---|---|
| 60 mm | 15 mm | 65 mm | 14 mm | 300 sets |
| 75 mm | 15 mm | 81 mm | 14 mm | 180 sets |
| 90 mm | 18 mm | 97 mm | 16 mm | 120 sets |
| 100 mm | 20 mm | 108 mm | 18 mm | 120 sets |
| 120 mm | 25 mm | 130 mm | 22 mm | 60 sets |
| 150 mm | 30 mm | 160 mm | 27 mm | 48 sets |
| 180 mm | 30 mm | 190 mm | 27 mm | 48 sets |
| 200 mm | 30 mm | 210 mm | 27 mm | 40 sets |
Bottom and cover dimensions are shown separately to prevent ordering ambiguity. Wall thickness, dimensional tolerance, exact MOQ and lead time are available on request and depend on the final product configuration.
“Glass Petri dish” identifies the product form, not a single universal glass composition. Procurement documents should state the required material and obtain confirmation for the selected size.
Suitable for general laboratory supply when the material and intended workflow are confirmed before ordering.
Available configurations can be reviewed where buyers require reusable laboratory glassware with a confirmed material specification.
Non-standard diameters, heights, packaging or private-label requirements go through technical review before quotation.
Reusable glass options can support laboratory workflows that include washing, inspection and an approved sterilization process. However, the maximum temperature, thermal shock performance and number of autoclave cycles have not been stated as universal values.
Do not use a generic website statement as a substitute for the confirmed product documentation, equipment instructions or your laboratory’s risk assessment. Ask for configuration-specific information before approving a cleaning or sterilization cycle.
Order review also covers internal separation, outer-carton strength, labeling, pallet preference, destination and whether buyer-specific packaging is required.
Identify the bottom diameter and corresponding complete set.
State the intended use and required glass option.
Provide estimated sets or cartons and destination country.
Confirm standard, private-label or custom export packaging.
These Cluster articles answer separate questions and link back to this core product range.
Choose among 60–200 mm bottom diameters without confusing bottom and cover dimensions.
Understand how material identity changes documentation and workflow decisions.
Review process validation, material confirmation and safety limits before heat processing.
Turn size, material, quantity and packaging needs into a complete RFQ.
The listed series uses a bottom and a separate matching cover. Both diameters and both heights are stated in the specification table so buyers can verify the complete set.
No. Material options must be confirmed for the selected size and intended use. We do not describe every glass dish as borosilicate unless the requested configuration has been verified.
Reusable options are available. The suitability of a cleaning or sterilization method depends on the confirmed glass material, product condition and your laboratory SOP.
Exact MOQ depends on size, material, packaging and whether the item is standard or custom. Send your estimated quantity and destination for a configuration-specific answer.
Yes. Samples can be requested for dimensional, cover-fit, material and packaging evaluation. Sample availability and shipping arrangements are confirmed individually.
Include the size, estimated quantity, material preference, destination and any packaging requirement.